Everything is so simple that an 8th grader can do it, we checked)
You can top up your trading account with a bank card from any country in the world (except Russian banks)
or cryptocurrency.
If you are in Belarus, the EU or another part of the world, then the “top up with a card” method will be available, and you don’t have to check it.
If you are in the Russian Federation, even if you are not a citizen, there is a possibility that topping up with a card will also not be available. Use a VPN.
To be 100% sure, you need to create a personal account with the broker: the menu item on the left is “trading account”. It will take 5 minutes.
After this, you can finally approve your method: top up your account from a card, cryptocurrency or from e-wallets.
Important: the card must belong to the account owner.
There are no such rules with cryptocurrency wallets, since they are anonymous.
When replenishing cryptocurrencies, do not use exchange wallets, because on exchanges the wallet address for sending and the address for receiving cryptocurrencies are different, while the broker withdraws funds to the same details from which the replenishment was made.
you can verify from your mobile phone
To do this, complete the menu item on the left "Trading account".
Then provide this account number to us. The account number is written in the license, the robot works only on this account.
You can top up your account immediately or at any convenient time, but to install the robot, your account must be greater than 0.
To obtain a license, just open an account and tell us its number.
The menu on the left is "Server".
Create your account on the provider’s website and follow the instructions and select the desired option. Server cost €4-6 per month (may be more expensive when paying from the EU).
A virtual server allows you not to use your PC to operate the robot. Otherwise, you would have to never turn off your PC and never lose connection to the network. In everyday life this is almost impossible.
This stage will take 10 minutes.
You can do it yourself or
through remote access to your server, our specialist will install everything himself
The account is replenished, the robot is installed and working to generate profit on your deposit.
For the convenience of account control and withdrawal of funds, we recommend installing the application on your phone - section 5 of the “Account Control” instructions.
You can also verify your account now or later when you need to withdraw your profits from your account.
In some cases, verification may be required immediately after registering your personal account.
Go to the brokerage company website https://roboforex.com/
Be sure to click this link rather than copy it so that you can access the broker's special trading conditions (issued for professional teams) -
transaction size from 0.01 lot instead of the standard 0.1. This will allow you to work with a deposit of $100 instead of a deposit of $1000
- Select a language, if necessary (Russian is only available in your personal account, after registration)
- Click "Open an account"
- We enter real personal data in Latin letters: E-mail, First Name, Last Name, current phone number.
- We tick the boxes as in the screenshot and click “Register”.
If you can’t click on something, check whether auto-translation of pages from English into Russian is enabled in your browser. If yes, disable it, it may interfere with the correct display of drop-down windows.
You will receive 2 letters by email:
- The first will contain the password for your personal account (save it and your login, this is important data for accessing your account).
- The second letter with a link to confirm your email, click it.
Your account will then open.
If you want to work with the Russian-language account, close the window that opens and
go to the Roboforex for CIS section link
https://my28.roboforex.org/ru/
Enter your login (email) and password from the previously received letter
When you got to your Russian-language office:
- Click "+Add account"
- At the top of Trading account select "Real"
Below
- Trading platform select "MetaTrader 4"
- Account Type select "MT4 Cent Affiliate"
- Set Leverage to "1:2000"
- Check the box "I agree to the terms.."
- We come up with a password for the trading account (not a password for your personal account, but a new password for a new account) and confirm. Choose a simple password for your account, as you will need to enter it regularly to transfer profits.
If verification has not yet been completed, then below you need to fill in the fields “City, address, postal code” (in Latin).
Please check your entered details carefully before confirming.
An email will be sent to you with your trading account details.
The robot will need a number, password and server
If you delegated the installation of the robot to us, please send a screenshot of this email to us.
Just create it exactly according to the instructions as you just did with a trading account.
Choose a simple password for your account.
All accounts will have different numbers.
If you take 2 or more robots for a test, then open the same number of accounts - 1 for each robot
You can replenish the account at any stage before installing the robot in your terminal on the server
To replenish the account, select the "Funds" menu and further "Deposit Funds".
The deposit (the amount of replenishment) should have a certain size:
- For the Grid robot, a deposit can be from $100, and there should always be $100. Those. It can be equal to $200, or $1100, or $5100, but not $250 or $650;
- For a multicellular robot, a multiplicity of $ 200, i.e. $ 400, $ 1200 or $ 2600, but not $ 500 or $ 1100. T.K. "Extra" $ 100 does not participate in transactions.
- Choosing an account that needs to be replenished.
- Choose a convenient way to replenish.
- We indicate the amount of replenishment.
- Click "Deposit Funds" and then follow the instructions of the site.
To buy a remote server, we go
to the website https://zomro.com/vds
If you are a citizen of the Russian Federation and you have a Russian map, then for you website https://omro.host/vds And other instructions for the server here
Click SIGN IN
- Choose a language, if necessary.
- Switch to "Registration".
- We fill out all the fields: name, e-mail, come up with a password and repeat the password.
- We perform the check "I am not a robot"/"i'm not a robot".
- Click "Register".
Or we are registered using our account in one of the social networks.
There will be a notification of successful registration.
Enter the e-mail and password to enter your personal account, click "Log In".
In the personal account at the top we press the link, a letter will come to the mail to confirm e-mail. We follow the link from the letter.
Next, we need section 02. Virtual Servers, click on it.
If they offer a promotional code at a discount, then copy it (save) to apply further when paying.
Click "Order".
Choose "servers with SSD disks"
Click on 1 of the first three tariffs, depending on the number of connected robots
1. We indicate the period for which we rent the service. The longer, the higher the discount:
3% in 3 months.
6% in six months.
12% per year.
18% in 2 years.
24% in 3 years.
2. Choose the operating system as in the image.
3. After that, click on the "buy" button at the bottom of the screen.
- We insert the promotional code, if any, click "Apply". (Promotional code can only be applied if the server is renting for 1 month)
- We indicate the necessary data: an individual, name, country, address, put a checkmark on the acceptance of a public offer.
- Choose a payment method: if payment by Visa/MasterCard cards, then select "Stripe"; For the Russian Federation, payment is possible through QIWI; You can also pay through PayPal and Unionpay cards. With the amount of payment of more than $ 5, you can pay using Bitcoin and other criticism.
- Click "Buy" and pay
After payment in section 02. Virtual Servers will appear our server. When the server status changes to "active", then you can connect.
To obtain a server data for configuration,
In your Zomro office, click on 3 points on the right - the menu will open - instruction
The menu becomes active only after changing the status of the service to "actively", that is, the green circle.
Orange - in processing. Red - disabled/stopped
Make sure that you tied your bank card to the Zomro (Omro) account and set up auto payments.
Be sure to confirm your email so that lease notifications and payment reminders come to the mail.
3 days before the end of the lease term, a reminder of the extension will be made to your mail.
If you expire the payment, the service will be suspended and the robot will stop working.
For each day of the delay, a penalty will be accrued.
Within a week from the end of the lease term, it is possible to extend the service. To launch the robot, you will need to connect to the server and start trading.
If the service is overdue more than 7 days, then the service (server) is deleted. In this case, you will need to rent a new server, connect to it, install and set up everything again, as for the first time.
delegate to our specialist. Choose the option below
So that we set and mood you terminals and robot, let us know
- data of your trading account from the letter received (you can screenshot as an example)
- Access to the remote server:
- Either email and password
- or IP+Admin from the "Instructions" section in your Zomro office
- or data from a letter received by mail after paying the server
The trading account password is used by a robot to open transactions, but does not allow you to manage money in the office without full access to the office.
We do not store the password from the server, and you can change it immediately after installation.
The only thing you need to store and never transmit is the access data to your room (account) Roboforex, which you received in the very first letter when registering
SERVER TUNING
On the keyboard, click the combination of the Win+R keys, and in the window that appears, enter the "mstsc" and click "OK"
Or you can press the "Start" button with the right key and select the "Run" item in the menu that appears
Open additional parameters
- In the "Computer" field, we indicate Server IP Address from a letter
- In the "User" field we indicate user from the letter (most likely there will be "Administrator")
- Allow to save so as not to enter all the data for each connection and click "Connect"
Indicate the password from the letter and click "OK"
Put a checkmark so that next time there is no such window and
Click "Yes" to connect to the server.
We connected to our server.
We wait for the load and close everything that will open.
Press the "Start" button in the lower left of the screen.
Launch Internet Explorer
Close all unnecessary, enter the broker website into the address line
https://roboforex.com/forex-trading/platforms/metatrader4-mt4/
And switch to him
Click the "Download Metatrader 4 For PC" button and wait for the installation file loading
Run the downloaded file, click "Next" and wait for the completion of the installation.
Click "Ready".
If the site mQL5.com is opened - close, we do not need it.
The trade terminal will immediately start.
Click the “cancellation” after which a window will appear to connect to the existing account.
- In the Login field, indicate the account number
- In the Password field, enter the password that you indicated when opening an account
- In the “Server” field, select the server specified in a letter with a trading account data
- We put a checkmark so that the terminal remembers the data and click "Login"
name and surname
To change the language used by the terminal, we click “View”, at the very top of the Languages menu, and select the desired language from the list. The terminal will need to be restarted.
In the terminal menu, click “File” and “Open Data Folder” (open data directory)
In the opened folder we go to the "MQL4" folder
Further in "Experts"
We transfer to this folder the sales adviser received from the manager and close the folder
In the window of the sales terminal navigator, click the right mouse key on the Expert Advisors and click in the Refresh menu. Your robot will appear on the list.
Close unnecessary graphs
In the “Market Watch” window (market review), click the right mouse key on the Symbol column and click “Show All”
For convenience, you can expand this left panel by simply stretching
We find the desired currency pair, in this example XAUUSD, press the right key and select “Chart Window”
Add the robot to the graph by double pressing it in the navigator window, or you can drag the navigator from the window to any place of the open schedule
We go to the “Inputs” tab, click “Load” and select the adviser settings file
We go to the Common tab and put the “Allow Live Trading” tick, press “OK”
In the upper right corner of the schedule, the name of the adviser and a sad smiley will appear (this means that the adviser is added, but does not work yet)
- Switch the schedule to the desired timeframe, in this example the adviser should work on D1 (1)
- Switch the schedule display to Japanese candles (2)
- We turn on the schedule shift for the convenience of viewing (3)
- Click "Autotrading" to allow trade with the help of advisers (4)
Now the smiley smiles, so the adviser will trade. You can expand the graphics window to the entire terminal.
It is also convenient to make a profit output and replenish the account there.
To download the application, go to the website of the roboforex.com broker from a mobile device.
At the very top there will be the "Download" button, click and install.
Enter an E-mail and password to enter your account.
To switch between trading accounts, we press three strips on the top left to open the menu and at the very top we see an active score.
For some operations (for example, an internal transfer to another account), you need to go to your personal account, for this we press the corresponding button in the menu.
At the bottom of the menu, you can go to the application settings and select the tongue there.
In the “Position” section at the bottom of the screen you can in real time track open transactions and changes in balance when closing them.
To see the history of closed transactions in the account, profit per day, profit for all the time or for any selected period, shift the lower menu to the left and go to the "History" section.
To transfer funds from one trading account to another, we go to the "Funds" menu and further "Internal Transfers"
- Choosing an account from which you need to translate
- Indicate the password from the account (not to be confused with the password from the personal account)
- Choosing an account to which you need to translate
- We enter the transfer amount
- Click "Transfer Funds"
In order to withdraw funds using a bank card, it is necessary to additionally pass the verification of the card. This is an optional procedure, but the company’s payment department can request it, so it is best to do it right away.
Click "Funds" and "Your Bank Carts"
- We read the instructions and examples carefully
- We upload photos of the card, as in the example
- Click "Add Card"
Data processing is carried out by employees of the payment department of the company from Monday to Friday from 9 a.m. to 18 pm (Moscow time) and takes up to 2 working days
To withdraw funds in the "Funds" menu, select "Withdraw Funds"
Choose a convenient way to receive funds and press "Go to"
- We indicate the password from the trading account (not to be confused with the password from the personal account)
- We enter the amount we want to withdraw
- Choose "New" if this is the first conclusion and indicate the number of the wallet/card where the money should come (if they displayed earlier, you can choose the same details)
- Click "Withdraw Funds"
- A letter with a confirmation code will come to the mail, which must be indicated on the page that opened and click "Confirm"
(You can configure the confirmation code for SMS, more on that)
In the safety settings of your account, you can specify your phone number and choose what actions in your personal account will be confirmed through SMS instead of an e-mail
Select "Profile" and "Security Settings"
- Indicate the phone number in the international format (SMS with the code will come, indicate the code and confirm)
- Click "Customize"
- We choose for what actions we want confirmation: withdrawal of funds, internal transfers, entrance to your personal account
- Click "Confirm"
To confirm the operations in the application in the menu on the left, select the Two-Factor Authentication Code.
Inside you will see a code of 6 digits that need to be entered on the site. The code changes every 30 seconds and you need to have time to enter it before the circle becomes completely red. If you did not have time, just enter a new code.
To increase the protection of your funds and to unlock all the services of the broker, you need to verify the account of the account. Without verification, you can trade, but for the withdrawal of funds, verification is required
We move to Profile and Verification
A page opens, where we see that we need to go through 3 stages of verification:
1. Verification E-mail
2. Verification of personality
3. Verification of the address
Verification E-mail
Press the link "Pass the verification"
Click «Send code»
A letter with a code will come to the mail, copy the code
We insert the resulting code into the corresponding field and click "Confirm"
The first stage of verification is passed
Below on the same page, carefully read the instructions and fill out all the fields to verify the personality. Download the photo/scan of the document.
Indicate the actual data.
Below similarly, fill out all the fields for verification of the address, download the document and click "SEND"
Checking documents usually takes several hours, sometimes up to a day.
Click "SEND"
Documents sent for verification
(People do not read them, the data are checked automatically: what you wrote in the field and what is indicated in the passport. If you made a typo, the error will come with which your Roborex manager will manually work)
Checking documents usually takes several hours, sometimes up to a day.
When the verification is passed, 2 letters will come to the mail (one for the verification of the personality, the second for the verification of the address), where it will be written about successful verification, or, in case of refusal, the reason should be indicated. Most often, the verification of verification is associated with the low quality of the photographs of documents.
When everything is ready, the status of verification will change in your personal account.
After that, you can make a withdrawal of funds from accounts
And here we placed the Roboowner’s reminder, where we described in detail how to withdraw profit and many other questions
> Go to the Reminder
REMEMBER
We recommend that you do not accumulate profit on trading accounts, but regularly transfer it to another account, or display it.
This is our main recommendation.
A trading robot is an add-on to software that is not subject to mandatory certification. The Company does not engage in activities subject to licensing, as well as brokerage services, trust management or borrowing from the public. The Kronon company.Tech and its employees are not financial advisors or brokers.
Attention! Trading using automated algorithms refers to financial activities.
Any financial activity involves risks
